Quote:
Originally Posted by RMcNeal
Had similar issue with my Ford puck system. Had to use some Deep Creep to get it out after leaving it in for about 11 months. Since then, I remove it every so often and spray lube in the holes of the truck puck mount. Mine is a 2014 F350, so rust inside the tubes is becoming an issue causing the binding and the B&W Companion is pretty tight fit.
|
I have the same exact setup, 2014 F350 & B&W, white lithium spray lube and no issues in six plus years.
I would use some WD 40 and a pry bar to remove. Good luck and let us know.✌🏻️