Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Reconnect ice maker line to cut off valve

gary s swenson · 05-22-2020, 04:21 PM

Need some guidance. While I was turning on the valve, the small tube going to the ice maker came out. I removed the nut from the valve but did not find a Ferrell inside like I had thought I would. I tried to reinsert the tube after I trimmed off the used end but could not get it to insert into the valve. I don’t see how it can not leak unless it goes inside the valve. Am I missing something?
Thanks for your help.

05-22-2020, 04:21 PM	#1
gary s swenson Montana Fan Join Date: May 2016 Location: celina Posts: 109 M.O.C. #18604	Reconnect ice maker line to cut off valve Need some guidance. While I was turning on the valve, the small tube going to the ice maker came out. I removed the nut from the valve but did not find a Ferrell inside like I had thought I would. I tried to reinsert the tube after I trimmed off the used end but could not get it to insert into the valve. I don’t see how it can not leak unless it goes inside the valve. Am I missing something? Thanks for your help.