[maximo]

I have a 2011 Big Sky 3580RL with the Lippert Leveling system.

Lippert Instructions say " To Hook Up Camper"

1. Turn panel on (Display Reads "LEVEL...JACKS DOWN).
2. Push "LEFT" and "RIGHT" buttons at the same timeand release. Camper
will return to where the sequence for auto level started, not
necessarily where it was dropped off of truck.
3. Hook up truck to camper.

AT this point I can not hook up because my trailer pin is about 2" above the hitch plate. Question: What do you do to get the pin down to the plate and continue the auto retract on the jacks. If I push the "RETRACT" button then push the "FRONT" button to lower the pin to the hitch plate then hook up and lock the hitch ad push the "UP" arrowbutton and then push the "AUTO RETRACT" then "ENTER" button the jacks do not retract. I then have to go to the manual mode to lift the jacks. This works ok but not the way the instructions say for AUTO RETRACT. I called Lippert and they gave me a talk I would have to be a MIT grad to understand.

How do you do it?

Frank

Frank