|
Thanks Carl. I was able to find those diagrams on the forum but wasn't sure the best technique for removing the pins without doing damage. Probably won't need the shear pins as the whole leg needs to be replaced. The threads inside were toast -the jackscrew had nothing to drive any more. So I will get a new leg assembly now. Hopefully installation is easy! Thanks again. Now I can get started and remove my peeling decals, fix the outside faucet leak, figure out why my battery won't charge on shore power, and try to remedy the non-working slide/gear/stabilizer rocker switches and then we'll be good to go for the summer (knocks on wood).
|