I did mine at home. Running the lines was the part that took the longest to configure. It is doable. One thing I had to do was to bring the connection from the rubber line to the hard line about 8 or 9" INWARD from the frame and I used a piece of angle iron to do that. Had to do it on two other trailers the same way. Here's a pic of it.
__________________
2020 Montana 3790RD Legacy EditionOnan, TST TPMS, TrailAir pin, Discs,
2013 F350 DRW 4x4 CC LBViair 10007, Ride-Rites, Westin HDx, 12k Smittybilt
|