Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

BB_TX · 06-03-2015, 08:07 AM

Ours also only had the one cable/sat coax input. So I added a new one for the Tailgater. In my case it was quite simple. The TV cabinet is next to a side wall. And I could remove a side panel in the cabinet below the TV and see the outside wall. So I drilled a hole in the outside wall and in the side panel. I installed a weather proof coax connector on the outside wall, and a coax wall plate on the inside panel. Then used a 3' or 4' RG6 coax to connect the two. Tailgater works great with it. I can still use the original to connect to cable if I want, or use the antenna.

06-03-2015, 08:07 AM	#7
BB_TX Montana Master Join Date: Oct 2006 Location: McKinney Posts: 7,172 M.O.C. #6433	Ours also only had the one cable/sat coax input. So I added a new one for the Tailgater. In my case it was quite simple. The TV cabinet is next to a side wall. And I could remove a side panel in the cabinet below the TV and see the outside wall. So I drilled a hole in the outside wall and in the side panel. I installed a weather proof coax connector on the outside wall, and a coax wall plate on the inside panel. Then used a 3' or 4' RG6 coax to connect the two. Tailgater works great with it. I can still use the original to connect to cable if I want, or use the antenna. __________________ Bill & Patricia Riley, our Golden 2007 3075RL (recently sold, currently without)