[Dave W]

As I mentioned in tmy 23April post, rechecked the torque on the replacement 9/16" U-bolts. At 75lb ft they were all fine, but then that was at least the third recheck and something done at every wheel bearing sevice or yearly, whichever comes first.


Just a note here and kinda related - two years though only about 2500 miles, those bearings looked just like the day they emerged from the Timken box in 2016 even with the Mystic grease separation that had concerned me. They now have been relubed using Valvoline full synthetic grease which seems to have a more tacky consistency and meets the Dexter spec.