|
The slides and six point level up are independent of one another, I believe if your slides are out and you rotate the hydraulic motor in the direction that would retract the slides, they would indeed retract. Now I am not sure that you may also have to activate the switch in the retract position at the same time as there must be electric valves that need to be opened to operate in either direction.
I think the level up would be the same and the control would have to be in the manual mode and you would have to use the buttons on the control to move them in whatever direction you wanted while the pump was running, there has to be electric valves in play here also.
Someone may have experimented with this and might be able to give a good explanation.
If you run the motor with jumper cables, it would be my opinion nothing would happen unless you also used the extend/retract switch at the same time to open the electric solenoids.
My take on it for what it's worth.
|