Thread: Entry Door Lock
View Single Post
Old 09-22-2021, 05:42 PM   #12
laverdur
Montana Fan
 
Join Date: Nov 2011
Location: Albany
Posts: 407
M.O.C. #11972
My door latch became hard to operate and it was hard to close the door without slamming it. I pulled the whole lock assembly out, took it apart, cleaned it up with Brakleen and then lubed it with Disk brake caliper synthetic grease. Problem solved. A little white lithium grease on the latch and striker plate also helps. Sybthetic brake grease was the lube of choice because it stays soft at cold temps and does not melt and flow at high temps.
__________________
2012 3150RL. G614 tires. Hardwired surge protector. Level-Up Hydraulic leveling.
2013 F-350 Lariat 6.7 PSD SRW SC LB 4X4 OEM hitch, air self-leveling on rear. 57-gallon replacement fuel tank. DieselSite water separator/fuel filter.
laverdur is offline   Reply With Quote