[Brian S]

I have a Magnum Dimensions inverter (CSW2012X). The "problem" I have is that the status light stays amber, even when on good shore power. All battery and inverter switches are in the on position. When I turn shore power off the status light stays amber (and display stays green) and voltage drops a bit. This is to be expected. With power off only the inverter outlets work, not all. Again, as expected. When I turn shore power back on the voltage pops up a bit, all outlets now work, but status stays yellow. I believe it should be green. Also, inverter is warm to the touch. Any ideas/suggestions?

Thanks as always!