Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Water pump keeps running after water fill

awaywego · 03-02-2012, 02:33 PM

I may be misunderstanding what you are saying, but you do not need to run the pump to fill the storage tank. I believe yours is the same system as mine and all I do to fill the tank is turn the valve to auto fill until it comes out the filler neck and vent or the level light comes on for the amt. I want.
I then turn the valve back to normal and turn the pump on if I need water in the sink and etc. After you cut the water off the pump should stop after a few seconds when the pressure is built back up in the line. When you cut the pump off there is still some pressure on the line so it will continue to flow for a few seconds with the pump off and the spigot open.

03-02-2012, 02:33 PM	#5
awaywego Montana Master Join Date: Nov 2002 Location: Midlothian Posts: 956 M.O.C. #40	I may be misunderstanding what you are saying, but you do not need to run the pump to fill the storage tank. I believe yours is the same system as mine and all I do to fill the tank is turn the valve to auto fill until it comes out the filler neck and vent or the level light comes on for the amt. I want. I then turn the valve back to normal and turn the pump on if I need water in the sink and etc. After you cut the water off the pump should stop after a few seconds when the pressure is built back up in the line. When you cut the pump off there is still some pressure on the line so it will continue to flow for a few seconds with the pump off and the spigot open.