Quote:
Originally Posted by rohrmann
When we are traveling, I always drop the trailer before leveling and putting out the slides, because the usual routine after that is to go get fuel and maybe dinner, then back to the rig for the night. The auto level function with the hydraulics always wants to drop and then come back up in the leveling sequence, and unhitching only takes a minute or two. I have jacked up the rig to service the bearings or change a tire with the slides out, and then re-leveled with the slides out, and never had an issue.
|
The very first time I went to "camp" around the corner from home while the slab was being poured for the 5r, the auto level kept having an error. Turns out we had the rear very low (was at lakeside with slope) and the auto level needed to lower front below level to set. Had to go to big box store for lumber, go by house to cut, then pull out and park on staggered 2x10 boards. Worked fine after that.