|
Whoa, I just saw my table isn't aligned very well. Based in Irlpguy's description the torque should be 135 ft lbs. See above that I tried to fix the table. 170 is for the Grade 8 hardware. In my case I hope I have Grade 5 and small bolts because I do NOT have a torque wrench that goes beyond 150 ft lbs.
The font used and the spacing may still distort the view of the table (the link provided by 8.1al and scanning down to the end of the document will also work). There should be 3 columns, one for the Bolt size, a second for the Grade 5 zinc hardware and a third column for the Grade 8 hardware and thanks to dieselguy on how to tell the markings for what bolts you do have. I can never remember that kind of stuff.
|