Quote:
Originally Posted by RMcNeal
I have a couple of wet bolts that won't take grease. Is it safe to pull them without the springs popping out of alignment? I've never taken anything like this apart before. I have the Morryde system and I have read that they can either be clogged or misaligned and fixing it requires removing and cleaning the wet bolt, then reinstalling in the correct alignment at either 9 or 3 o'clock. Is that correct? Do I need to somehow support the springs to prevent them from coming out of alignment?
|
I had a complete wet-bolt kit installed this spring and had 2 grease zerks that would not take grease. I used a 6 or 8mm wrench to loosen the zerk's and they both then took grease. then re-tighten the zerk, Maybe, give this a try as a simply fix. hope it helps.
__________________
Joe & Rita, Boise ID
2014 3402RL, Morryde pin box, dual AC
2020 RAM 3500 Mega, Dually, 4:10, HO CTD, Aisin.
|