|
Update!
Firstly thank you all for your advice. I called Splendide customer service and they diagnosed a pump problem, either a failed pump or a cable had fallen off. The cost of a replacement pump was $140 plus shipping so I decided to have a look at it myself. I turned the unit on its side and removed the bottom plate from where the pump was accessible. First I applied 110V to the terminals and nothing happened so I pulled it out and pulled it apart. The inside had quite a bit of water around the rotor part so I dried it all out and put it back together.
After re-assembly I ran another cycle and it now seems to be working again.
Cheers
Craig
|