|
Morning Carl
The cable is connected to the valve by running the cable ,along with the cable housing, through the stirrup end of the valve assembly.
You'll push the housing in until it's flush with the inside edge of the stirrup and then retighten the angled set screw they use to hold the housing in place.
You need to make sure the new cable is in the blade valve collar.
I pulled the set screw out of the collar and applied some lock tight before securing the new sold cable.
Note that you'll need to really tighten the set screw ,because the new solid cable won't bend inside the collar as easy as the stranded OEM cable. You know what I mean.
Hope that helps ya.
|