I'll re-check mine, thanks for the tip. I'll let you know how far I was off. I just cranked them until my eyes started to bulge out.
Edit.
OK, I had two a little loose, turns out 'Eyes bulging out'=185# or so. I will say I am not a weak man and 185# on a 18' or so breaker bar; or as in my case a torque wrench is a hefty pull. So those of you without a torque wrench,(Shame on you) just get it as tight as you can, without a cheater on a breaker bar and it will be good.
Ozz
|