Quote:
quote:Originally posted by jcurtis934
The aluminum rod with the handle attached to it is very short and has inside threads on the other end which screws onto male threads on the tank gate valve. Since yours is easy, either it has unscrewed itself or the threads on the rod are stripped. Cutting the little tiny flap in the belly or removing belly screws in that area will allow you to see what problem you have. John
|
I have pulled the under belly down and notice the gate valve is all one piece and the aluminum rod slide in and out. I cannot see the other end. All I see is the rod sliding in and out of the gate valve assembly. I tried to turn the rod to see if it screwed onto to gate valve but all it did was turn and turn.