Quote:
quote:Originally posted by jfaberna
So is the consensus use a 100A fuse at the battery for a non-modified Monty with one battery with Level UP and slide hydraulics?
I assume the Blue Sea 5191 block does NOT come with a fuse. Is that correct??
|
Jim I would say 100 to 125 ceramic fuse. If you have the level up then 80 amps is what my system is fused at. I would never expect you to run both hydraulic systems at the same time.
If you blow the ceramic fuse from use then upgrade it by 25 as long as a direct short did not cause it to blow.
As stated above you order the holder and then the size fuse you want. I don't have a spare and probably should get one also.
I hope this helps
Safe travels.