Quote:
Originally Posted by RipNC
I had this issue and it turned out to be the Hydac valve on the front landing gear master (driver side). I first made sure the manual valve (set screw on the Hydac valve) was closed (closes counterclockwise). It still leaded thru so I had to replace the valve. Lippert support is the place to start.
The hydraulics all operate off one pump and the Hydac valves control the flow. When the pump is running the non-operating valves must stop the flow - if they leak the rams will operate.
|
That was my first thought. Just couldn't remember "Hydac" valve. Senior moment.
