As Tammy stated, I re-caulked ours along where the glass sits on the fiberglass bottom - the entire edge. I then cauled where the glass sits in the frame on the bottom and up each side about 3 inches. ALSO, and this is the important part, examine the shower metal really carefully. There are joints that are well made, but not water tight. I also caulked these - especially in the valley where the door opens. Then after being contorted in that tiny little shower, do the same thing on the outside just like the inside. I let it dry and then checked for leaks over the next few days. I had a few drops. re-caulked those areas and no more water.
good luck,
Bernie
|