|
Here's a shot of my manual controllers on my old Montana about your year. (3 round knobs on manifold above reservoir) Don't look for the solenoid valves on the back wall on your unit ... I added those ... they are 12 VDC solenoids so I didn't have to twist the manuals valves ... I just flipped a switch inside my fiver.
These shut off valves will stop each slide individually, but will not alter the sequence that the slides go out. Our hyd systems are open loop (all cylinders hooked together) The pump runs one way to extend the slides and the opposite way to retract. The slide with the least resistance moves first, then the next least resistance next, so on. I know you want all info you can get, but since someone else does all your setup and you have no truck, this seems rather inconsequential.
|