Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

Phil P · 07-12-2014, 12:37 AM

Hi

I have never used any breaker or fuse larger than 30 amp in our 12 V system and have never tripped a breaker or fuse after repairing the mess Keystone made of the wiring.

This was prompted by reaped blowing the single 30 amp fuse they had installed for all 12 V circuits except the slides.

They had bundled all the wiring together 110 AC and 12 V DC with the converter turned off, the air conditioners on and the battery removed I had 90 V on the 12 V system. After separating the wiring properly I was able to get this down to 10 MV.

Phil P

07-12-2014, 12:37 AM	#8
Phil P Montana Master Join Date: Mar 2011 Location: Okeechobee Posts: 2,150 M.O.C. #11206	Hi I have never used any breaker or fuse larger than 30 amp in our 12 V system and have never tripped a breaker or fuse after repairing the mess Keystone made of the wiring. This was prompted by reaped blowing the single 30 amp fuse they had installed for all 12 V circuits except the slides. They had bundled all the wiring together 110 AC and 12 V DC with the converter turned off, the air conditioners on and the battery removed I had 90 V on the 12 V system. After separating the wiring properly I was able to get this down to 10 MV. Phil P __________________ 2009 Montana 3665RE 2009 Duramax 3500 DRW quad cab personal web page https://www.sallyscoffees.com If you get a page not available then remove the "s" after HTTP