|
I had one of our cross members bend also. We straightened it and set it back into place. Fingers crossed, no more problems and that was two years ago. When we had the mobile tech come out for the tank, he was the one that found it. He said the biggest problem is folks fill their tanks to full and this brace is not made for that weigh and it bends. He told me to only fill the tank about half full or so if possible and then dump. It has worked so far and I'll keep up the practice until I hear or see differently. Oh, by the way when we bent the brace back we also reinforced it with another piece of steel bar to make sure it did not bend again also.
|