Quote:
Originally Posted by Brian S
My problem is similar. Looks like moving the standoff bracket is a major job. I don't see adjustments, just the screws direct into the slide. I also don't see how the pullies would be adjusted, which I guess could be the other way to get them aligned and even. Faulty build in my opinion that I cant get anyone to take responsibility for.
|
No, it’s not a major job. There are two adjustment slots and four “locking” screws in each bracket. Remove the locking screws, loosen the adjustment screws and move the bracket up or down. We’re talking like 1/4” in either direction. Doesn’t take much. The pulleys can’t be moved, that’s why the cable-end bracket has to be adjusted. But which way? I have to figure this out before I replace the cable. I only have one more cable left!