Mike, on our current unit, I turn the physical switch on, then off, then back on. That activates the motion sensor circuit on the light. If you just turn the switch on, it is on until you turn it off. I assume that on/off/on on the In-Command panel would do the same thing.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|