|
Well I completed the Satellite connection install.
Somehow I missed the aluminum studs and all went well. I bougt the correct connector from a RV Supply, drilled a whole just large enough for the F connector to pass through and made the install. I place a 6 foot RG 6 line on the connector, tightented it up and fed it through the hole. Placed sealer everywhere and completed the install.
I also added an extra electric outlet into the bath sink area the same way.
I added a receptacle onto the outside of the trailer and from this I ran a 12/3 electric wire into a receptacle I added on the side of the cabinet under the sink. This outlet will get feed by running an extension cord from the 20Amp outlet in my RV power box. It is protected with the 20amp breaker (or you can put an inline 15 amp) and you now have power to your trailer that is not pulling on your Trailer's 30 Amps.
|