|
They are clear tubing with white plastic caps hanging just below the underbelly insulation.
On my 3255 They are located two (Hot and Cold) by the stairs (on the left) near the front tire. The other holding tank drain is almost exactly opposite near the left front tire.
Keep them on until after you have blown out your lines and then remove them to expel any water in them. The holding tank drain you can remove whenever since your compressed air operation has no effect on the holding tank.
I also pull out the zinc Anode rod in the hot water heater to make sure it is drained. You may find yours is in need of replacing.
__________________
Chris Donna and Oliver the rescue Dog.
Old 3255RL It is a weekend warrior and less than 15K miles. Mostly sits at the house. Home is where the heart is.
|