Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

**DQDick** · 06-12-2015, 11:57 AM

I've got a couple of new chips coming for my solar controllers and of course they are placed near the top of the case so you can only get under the bottom. Basically they're just computer chips. It looks to me that grabbing them with a good pair of needle nose pliers and pulling straight out is the best approach, but since I've never done something like this before I thought I'd get some input. Any better ideas?

06-12-2015, 11:57 AM	#1
DQDick Site Team Join Date: Jun 2011 Location: Wilsey Posts: 18,799 M.O.C. #11455	Pull and install a new chip I've got a couple of new chips coming for my solar controllers and of course they are placed near the top of the case so you can only get under the bottom. Basically they're just computer chips. It looks to me that grabbing them with a good pair of needle nose pliers and pulling straight out is the best approach, but since I've never done something like this before I thought I'd get some input. Any better ideas? __________________ Dick, Joyce, Diego, Picatso and Gustav 2017 3720 RL, and 2013 HC 343RL Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.