Quote:
Originally Posted by bigdawgfinley
I’m replacing my 50 amp to an 80 amp today but I suspect I’ll need to replace the 30 amp as well. When my slides stop I always know when the CB resets when the fridge comes back on and beeps. Thing is the fridge is on the 30 amp circuit so the pump control circuit must also be wired to the 30 amp. When I disconnected the pump sure enough the solenoids in the control circuits clicked but of course the pump didn’t engage.
|
I would check the wiring very carefully. Typically the pump is wired to a dedicated breaker that affects nothing but the pump when it trips. But there have been some who reported that in some cases some of the breakers have been wired in series. Which is wrong.