|
Can you plug your voltage tester into a U-ground 120 volt on the power pole? If so, that may help determine if the voltage drop is in your wiring or the park's. If you see the same sort of voltage drop on the power pole, then it is the park's problem, and there is not much you can do about it. If the voltage holds at a normal level on the power pole, then look for a problem in your wiring. If any of your plugs look corroded, try cleaning them up with some metal polish or very fine emery paper. I would start at the power pole and work towards the trailer until you find the source of the problem. As others have suggested, there are several possible causes for what you are reporting.
|