[ChaseTX]

Originally Posted by Last2Die

I was able to take care of the screw and install the new seals all is good there. The screw will no longer dig into the side. Just wondering what I should do about the damage the screw did to the wall. Yes the screw was to long but it’s good now !

To wrap up this project I just have the wall and the piece above the topper to replace. Don’t know what that piece is called....?

I would first contact Keystone and see what they suggest. If it sounds like a push off answer, you can go to an auto parts store and get a fiberglass fix kit and mix and fill the hole. Or get Bondo and resin and fill it that away. after hardened. sand down till flush, then paint color you want. I know this is not the optimal fix but it will work and should stop any spread of further cracking.

Not sure about topper, what is specific problem again.