Quote:
Originally Posted by lightsout
yes that was a typo,
However point being The balance change was for the most part insignificant to the front axel which I am pleased with. I should note that I have the Andersen turned for the SB so the pin/Ball location is well behind the goose neck. My problem is my rear is too high the 5th wheel is not level I was hoping the Ram would drop with the pin weight but it did not. Fortunately the Andersen hitch has a lot of adjustment that is easy to do however that will not get rid of the elevated bed height issue.
|
Yeah, that's a problem for me too. If you go back and look at my side pics, I'm a little too high in the front of the 5er. However, I have the hitch as low as it will go, and if I pushed the pin up, i would be too close to the bed rails, so I'm basically "stuck" at this height.
And, if I was level, I would be even worse...