Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - RAM 67,500 Mile EGR System Clean & Filter

oldelmer1 · 05-08-2017, 11:43 AM

I bought my CCV filter from Amazon, 8 or 10 bolts and the old one comes off, reverse to put it back on.VERY EASY.

After replacing the CCV, I thought the truck had more power to it.

Also cleaned the EGR valve, very easy too. Here's how from Geno's garage:

https://s3.amazonaws.com/cdn.genosga...GRCleanKit.pdf

Didn't do the EGR cooler though, seemed to involved.

EGR valve wasn't too dirty, just soak it on Simple green fir 24 hours, almost all the soot came right off. What didn't, I used a tooth brush to get the rest off. Rinse with clean water, then I used the exhaust of a shop vac to blow dry it.

Geno's give you all new gaskets to replace all the old ones.

VERY EASY TO DO....

05-08-2017, 11:43 AM	#7
oldelmer1 Montana Master Join Date: Sep 2010 Location: North East Posts: 1,050 M.O.C. #10758	I bought my CCV filter from Amazon, 8 or 10 bolts and the old one comes off, reverse to put it back on.VERY EASY. After replacing the CCV, I thought the truck had more power to it. Also cleaned the EGR valve, very easy too. Here's how from Geno's garage: https://s3.amazonaws.com/cdn.genosga...GRCleanKit.pdf Didn't do the EGR cooler though, seemed to involved. EGR valve wasn't too dirty, just soak it on Simple green fir 24 hours, almost all the soot came right off. What didn't, I used a tooth brush to get the rest off. Rinse with clean water, then I used the exhaust of a shop vac to blow dry it. Geno's give you all new gaskets to replace all the old ones. VERY EASY TO DO....