View Single Post
Old 06-03-2017, 11:17 PM   #7
CaptnJohn
Montana Master
 
Join Date: May 2017
Location: South East NC
Posts: 1,768
M.O.C. #19865
Rarely have a problem and if one is found it is most often rectified during the next move. Before each move all 3 tanks are drained. Then about 4 oz Aqua Chem added and 1/2 cup of Dawn with about 10 gallons of water down both gray water tanks. The black tank is a little different. Drain and add about 10 gallon of water after filling the bowl and dumping at least 3 times. Then I check the BW tank level. If not about right, dump and start BW flush with valve open for about 5 minutes. If all seems correct I do not bother with the flush. I fill bowl and flush 2 - 3 times and add 8 oz of Aqua Chem. Then 15 gallons of water and 1 cup of Dawn. I usually have 6 hours or more home and to the next CG where another 15 gallons of water added to the BW tank. Then it is dumped, galley tank, dumped, and shower tank dumped. 5 gallon added to all tanks and time to start again.
CaptnJohn is offline   Reply With Quote