Quote:
Originally Posted by Donjamin
I've been following this thread for a while. I haven't had any issues with my 2016 3160 RL Legacy slides, but the 80 amp circuit breaker sounded like an easy preventative maintenance fix. Today while we were prepping for a trip, I pulled off the old slide 50 amp CB and installed a new 80 amp Bussman CB. Attached are the pictures of the before and after. It took about 10 minutes to drill out the electrical lugs and install the new CB.
Don
|
Don it looks like you have connected your battery connect right to your motor connection. Battery connections should go to one side of each breaker and the load to the other side.To test just trip your new breaker and try pump. If it runs you have no protection.