[BB_TX]

Only way to know for sure is by measuring. A lot of variables involved such as hitch type, hitch brand, where hitch is installed in relation to your truck bed, pin box type and dimensions, and the distance from your king pin to the front of the trailer.


You need to measure the distance from the center of where the king pin will be located in your hitch to the most distant point of the corners of your bumper. Call that dimension A. Then measure the distance from the center of your trailer king pin to the nearest point on the front wall of your trailer. Call that dimension B. Dimension B (the trailer) must be greater than dimension A (the truck) to clear on a tight turn.