View Single Post
Old 05-03-2021, 07:26 PM   #11
DutchmenSport
Montana Master
 
DutchmenSport's Avatar
 
Join Date: Oct 2018
Location: Anderson
Posts: 2,533
M.O.C. #22835
Follow-up. I went to Harbor Freight and purchased a 1/2 inch breaker bar and a 3/4 inch socket. I had another 3/4 inch socket and ratchet, but really needed the breaker bar. So, the driver side (rear) was just horrible breaking loose, even with a breaker bar. But success prevailed. I raised the jack about 5 inches.

On the passenger side, 2 of the bolts were actually kind of looses. Maybe they got loosened up from dragging? They came off very easy. By now it was getting dark tonight when I finished up, and did the auto level. Everything worked perfect!

Then, I noticed the passenger side is one hole lower than the driver side. There is room to raise it one more hole, so tomorrow I'll do that side again and raise it so it matches the drivers side. But I say, The operation was successful!

Thank-you everyone for your vote of confidence.
__________________
Who you are right now is a sum total off all you use to be.
2019 Montana High Country 375FL
2014 Chevy Silverado Duramax, 6.6L Dually
DutchmenSport is offline   Reply With Quote