|
That was the second year production run of Montanas. Keystone was still in a learning curve with them. Hopefully it had the expansion joint kit installed in the front lower outside wall just forward of the bedroom slide cutout. Otherwise the fiberglass or actually Filon skin has or will crack diagonally towards the front. They also had a pretty wild cable actuated slide mechanism under the main slides. You may want to have a competent service center check its adjustment. The frames were not true rolled I-Beams but were what is called a welded plate I-beam. There was also a kit out that had to be welded on above the spring shackles that reinforced the frames in that area. You may want to check to se if that was done as well. A 16 year old RV with good decals ... now that's impressive! Many of us can't get 3-4 years out of ours.
|