|
Danny,
I don't know what year your rig is, nor am I familiar with how they did the Mountaineer electrical service, but here is what I found:
Keystone used an early 30A or optional 30A+20A(50A) service until late 2003, then went to a 50A+50A (at least on the Montana).
We had the optional 50A on our 2003 Montana. However, all it did was provide an additional 20A circuit for a 2nd AC. We didn't have a 2nd AC, so that breaker was always off. The 50A cord was a waste of time and it stayed home in the basement. We always used the 30A and an adapter for the Montana, as it was much easier to lug around.
Our 2007 is the newer 50A+50A service and we always get the 50A service when available. The cord is a pain to drag around, but we need the 50A service to take full advantage of the features. One time I plugged into 30A, and had to reset it several times before I learned what I could and could not run together.
IF you check the two main breakers, you'll see what you actually have.
|