|
Just spit balling here with first cup of coffee. OP stated his old motor would work when 12v was jumpered to the motor. "Mechanic" told OP there was good 12v going through the switches to the motor, so the motor was "bad". In this scenario I would check continuity on the GROUND side of the wiring to the motor. Dependent upon how the "jumpered wiring" was applied, one can get a false diagnosis if both positive AND ground jumpered leads were applied to the motor. Again - spit balling here...
__________________
 Lee, Edith, Lil' Bit & Cuddles
22 MHC 331RL, Surge Guard 35550, SumoSprings, Kodiak disc brakes, 412Ah Lithium, Gen 3 Goosebox, Sailun 85s
22 Ram 3500 CC DRW 6.7 CTD Herrin Hauler Classic Bed, 45 gal AUX tank
|