Quote:
Originally Posted by MORobb
...................2. Manual says use light oil (WD40 - 3in1) oil to lubricate. My hitch has some heavy grease applied liberally all over it. Should I remove all this old grease and start over?
3. I will be ordering a new capture plate, the hitch I purchased cam with one, but I can find no markings to determine if it is the correct one for my 19 High Country 331rl............
|
I also had Reese 15K slider hitch but after 11 years it froze and would not slide to put the hitch in maneuver position so replaced it with a Pullrite Superglide hitch
2. Remove the grease. The plate and it's moving parts should be lubricated with a light lubricant such as WD-40 or 3-in-1 oil, before each trip or as needed. I used WD-40 on mine.
3. You can find the correct capture plate if you know your king pin box manufacturer and model OR measure dimensions A, B and C per the links below.
https://www.pullrite.com/fit#QCCP-fit
https://www.pullrite.com/CP_finder