|
As you write this I had a thought. When we slide out the slides I go around and make sure the seals are going in the same direction. The seals will sometimes bend to the inside and to the outside along the vertical wall of the slide. I don't know if that transition is a place to leak but it seems logical to ensure the seal is straight.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|