|
Can't get to the bed with the slide in. Might be able with it partially out, but would be a tight fit.
On the critter keeper outter, mine has a 4" marine inspection port with a twist off plug in the bottom of the convenience center. You are expected to remove the 4" port and run your hose and cable through it leaving a big enough gap to give access to mice, chipmonks, and any other crawling critter. I got an extra port cap and drilled two holes in it, one for the hose and one for the cable. I install it in place of the one used for travel and run the hose and cable through it.
|