Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

richfaa · 02-04-2007, 05:21 AM

Forgot to mention that I have a good supply 2X10 blocks. We try not to keep the legs extended to far. Right now we are on 4 2x10 blocks and the pin is in the 6th hole on both sides ...Now we normally level the camper side to side , boards or whatever before we unhitch(of course) so theoretically the camper should be level or very close to level(side to side)therefore the legs should drop level..or very close..never saw more than one hole difference( less than 1 inch and will not flex anything) and have never had to raise the legs very much to hear the click(then check) of the pin locking in. Brad..it is not a good thing to have the leg fall on the ground..

did not know that could happen.

02-04-2007, 05:21 AM	#16
richfaa Montana Master Join Date: Jan 2005 Location: North Ridgeville Posts: 20,229 M.O.C. #2839	Forgot to mention that I have a good supply 2X10 blocks. We try not to keep the legs extended to far. Right now we are on 4 2x10 blocks and the pin is in the 6th hole on both sides ...Now we normally level the camper side to side , boards or whatever before we unhitch(of course) so theoretically the camper should be level or very close to level(side to side)therefore the legs should drop level..or very close..never saw more than one hole difference( less than 1 inch and will not flex anything) and have never had to raise the legs very much to hear the click(then check) of the pin locking in. Brad..it is not a good thing to have the leg fall on the ground.. did not know that could happen.