|
I was curious and went and measured my springs and hangers, I have 1 3/4" springs and my hangers measure 1 7/8" both at the top and bottom of the hanger, this gives the spring a 1/16th theoretical space on either side of the hanger for movement. I still had to remove 3 wet bolts and reinstall them to be able to grease them. All zerks were loose, three were missing altogether and I replaced all with 90 degree ones for ease of greasing.
Your selling dealer appears to do much the same kind of work as the one where I bought mine, poor workmanship follows all the way down the line. There is no way I would ever again have either yours or my dealer work on my RV.
|