|
When I changed my valves I discovered that they only closed about 2/3rds of the way, the factory obviously didn't install the cable pulls correctly from the start.
The job of changing them is relatively easy and IMO worth the couple hundred bucks for the new Valterra's ...... they operate smoothly and won't leave you jammed with a broken cable and a full tank like the originals did as a result.
The issue isn't exclusive to just Montana's BTW as several friends have had the same issues with other brands of trailers.
Takes about 2hrs to change them out, make sure you drive up on blocks so you can lower your front end of the trailer before loosening off the bolts on the valves or you're in for a nasty surprize...........good luck.
|