View Single Post
Old 05-18-2009, 10:53 AM   #2
Ray Audet
Established Member
 
Join Date: Mar 2008
Location: Niagara Falls
Posts: 33
M.O.C. #8296
HI Ron...We ordered our Montana 3465SA with the backup camera. It seemed to work fine for a while, then we got a lot of what I will call "interference". Called our dealer who managed to send a whole camera system to me-including receiver, transmitter and camera and all of the wiring. They actually sent 2 transmitters-so I assume that it's a frequent problem. Anyway, I traced my problems down to the transmitter. After replacing it, the second transmitter worked fine-for a while. But it eventually died and after taking it apart, I found some water build up in the transmitter itself. I then replaced the transmitter again, but this time I ran a bead of silicone around the transmitter where it meets the front of the Montana-no problems since.
So, your transmitter may be defective and you may need to get a new one. Once you get a replacement, I strongly suggest running that bead of silicone. The 2 face tape that holds the transmitter doesn't seem to hold the water back. Good luck.
Ray Audet is offline   Reply With Quote