Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Anyone with a Duramax using Edge Products

Rocky2 · 10-22-2006, 04:34 PM

Bob - I have a '04 Chevy with the Duramax/Allsion combo and I'm using the Edge attitude. I tow in level 2 at about 60-65 mph. I'm using the edge for the added torque. There's not that much of a horsepower gain in levels 1 thru 3 but you gain about 150+ foot pounds of torque which is very useful. The Edge attitude dose NOT void any warranties on the vehicle, I checked with both Edge and GM. My edge attitude is set to display egt and boost, all egt gauges sensors are installed after turbo (exhaust gas temp), I've noticed lower egts' and better throttle response while using the edge product. The edge attitude and A2 are signal modifiers there is no chip to install. The edge intercepts the signal from the engine sensors, modifys them and sends it on to the trucks black box. I'm happy with it and I'd do it again on another Duramax/Allison. I'm saying that as a retired diesel mechanic (23+ yrs).

10-22-2006, 04:34 PM	#20
Rocky2 Montana Fan Join Date: Jan 2005 Posts: 217 M.O.C. #2840	Bob - I have a '04 Chevy with the Duramax/Allsion combo and I'm using the Edge attitude. I tow in level 2 at about 60-65 mph. I'm using the edge for the added torque. There's not that much of a horsepower gain in levels 1 thru 3 but you gain about 150+ foot pounds of torque which is very useful. The Edge attitude dose NOT void any warranties on the vehicle, I checked with both Edge and GM. My edge attitude is set to display egt and boost, all egt gauges sensors are installed after turbo (exhaust gas temp), I've noticed lower egts' and better throttle response while using the edge product. The edge attitude and A2 are signal modifiers there is no chip to install. The edge intercepts the signal from the engine sensors, modifys them and sends it on to the trucks black box. I'm happy with it and I'd do it again on another Duramax/Allison. I'm saying that as a retired diesel mechanic (23+ yrs).