Quote:
quote:Originally posted by steelpony5555
Hmmmm never seen bronze bushings look as bad as they show there, nylon ones with no wet bolts yes, but not bronze.
|
I agree with steelpony... I would like to know where they got that bushing out of?? I don't see any grease or grease holes in that pic either. Now if if you have the nylon bushings, then, YES, get something else in there and this may or may not be a option for you. But, if you have wet bolts on your rig now then there is no need to look at anything else IMHO. As as a side note, if you have wet bushings, make sure they are installed with the holes the right way and do NOT buy one of those cheap, mini grease guns that take the 6" mini tubes of lube (ask me how I know). You will need a FULL sized greass gun with some OMPH behind it to get grease into the bushings...
~On Edit~ Also, make sure the grease zerks are on the inside of the springs as the wheels make it very difficult to work around.